User's Manual

Rev 1 PAGE 4
1. PURPOSE OF THE IDEN
The IDEN Bi-Directional Amplifier greatly improves RF coverage for areas in which
low signal strength or no signal is a problem when using your portable iDEN phone
inside the car.
2. HOW THE IDEN FUNCTIONS
The signal is received by the outside antenna from the cell site. It is then
AMPLIFIED/REPEATED and transmitted to your iDEN phone through the inside
antenna. When the phone transmits it is received by the inside antenna. It is then
AMPLIFIED/REPEATED and transmitted to the cell site through the outside antenna.
3. FEATURES
Wireless Operation - No Physical Connection to Cellphone
The IDEN Amplifier greatly improves signal strength inside a vehicle without a
physical connection to your phone. It also allows multiple phones to be used
simultaneously.
Advanced Electronics Receive & Transmit Better Than Your Cellphone
The Wilson Cellular Amplifier has a better receiver than what's in your cellphone. Its
advanced electronics are very sensitive and able to receive small signals that would go
undetected by most cellphones. It also has a better transmitter with double the power
of your cellphone. This allows your voice to be heard by distant cell sites, increasing
coverage up to 50 miles or more.
4. AMPLIFIER SPECIFICATIONS
Frequency…….……………...806-821 MHz Uplink 851-866 MHz Downlink
Gain………………………….37dB Uplink 37dB Downlink
Flatness………………………+/- 3dB Uplink +/- 3dB Downlink
Max RF Output Power…
…….+31dBm Uplink +15dBm Downlink
Noise Figure………………
….5dB Uplink 5dB Downlink
Uplink Downlink Isolation..
.…More than 90dB
Power Consumption………….12V, 1.5A
Connecter………………
……..FME-Male 50 Ohms
Dimensions…………………..5.5 x 4.3 x 1.4 (inches) OR 14.0 x 10.8 x 3.5 (cm)
Weight…………………….
….1.32 pounds or 600 grams
Model #………………………IDEN
Part #…………………….
…... 804002