User's Manual

ManualsBrandsWilson Electronics ManualsElectronicsiDen in Car Amplifier

Rev 1 MODEL: BD800NM

PART#: 804002

IDEN MOBIL Bi-Directional

Amplifier for

In Vehicle

Installation Guide

The information provided by Wilson Electronics, Inc. is believed to be complete and accurate. However, no responsibility is assumed by Wilson

Electronics, Inc. for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result

from its use.

FCC ID: PWO806WV

IC: 4726A-806WV

3301 E. Deseret Drive

St. George, Utah 84790

wilsonelectronics.com

tech@wilsonelectronics.com

Phone 1-866-294-1660 Fax 1-435-656-2432

Summary of content (6 pages)

PAGE 1
3301 E. Deseret Drive St. George, Utah 84790 wilsonelectronics.com tech@wilsonelectronics.com Phone 1-866-294-1660 Fax 1-435-656-2432 IDEN MOBIL Bi-Directional Amplifier for In Vehicle Installation Guide The information provided by Wilson Electronics, Inc. is believed to be complete and accurate. However, no responsibility is assumed by Wilson Electronics, Inc.
PAGE 2
TABLE OF CONTENTS 1. PACKAGE CONTENTS.……………………………….………page 3 2. ANTENNA OPTIONS...…………………………………………page 3 3. PURPOSE OF THE IDEN……………………………..…...……page 4 4. HOW THE IDEN FUNCTIONS………………..…………..……page 4 5. FEATURES……………………………………………….…..…page 4 6. AMPLIFIER SPECIFICATIONS……………………………… page 4 7. AMPLIFIER INSTALLATION…………………………... page 5 & 6 8. TECH SUPPORT…………………………………..……………page 6 9. NOTES & WARNINGS……………………………...…….
PAGE 3
Rev 1 PAGE 3
PAGE 4
1. PURPOSE OF THE IDEN The IDEN Bi-Directional Amplifier greatly improves RF coverage for areas in which low signal strength or no signal is a problem when using your portable iDEN phone inside the car. 2. HOW THE IDEN FUNCTIONS The signal is received by the outside antenna from the cell site. It is then AMPLIFIED/REPEATED and transmitted to your iDEN phone through the inside antenna. When the phone transmits it is received by the inside antenna.
PAGE 5
. AMPLIFIER INSTALLATION (REFER TO ILLUSTRATION) ILLUSTRATION 5.1 Mounting the Amplifier 5.1.1 Mount the AMPLIFIER under the dash or car seat. NOTE: The amplifier should be mounted to the selected location using mounting screws. (Mounting screws not included.) 5.2 Installing the Outside Antenna (Sold Separately) 5.2.1 Select an outside mounting location. For best performance try to keep the antenna centered on the car’s / truck’s roof. 5.2.
PAGE 6
5.3 Installing the Inside Antenna (Included) 5.3.1 Connect the Inside Antenna to the side labeled “INSIDE ANTENNA” on the AMPLIFIER. 5.3.2 The Inside Antenna should be centered in the vehicle. It can be placed in the seat back between the seat cushion and fabric or in the vehicle headliner.