In-Building Installation ������� ������� �������� ���� ������� ����� ���� ���� ������� ������� �� ��������� ���������� ��������� ����� ����������� ���������� ���� ����� Mobile Installation ������� ������� ���� ���� ���� ��������� ��������� ��� �� ����� ������� ��������� ������� ���� ���������� ��������� 4
labeled “CELLULAR PHONE”. 4.2.4 An external antenna adapter is required (sold separately) to connect the AMPLIFIER to the cellphone. External antenna adapters connect directly to the antenna extension cable. 4.2.5 Connect the DC power supply to the AMPLIFIER. Verify that both the OUTSIDE ANTENNA and the ADAPTER EXTENSION CABLE are connected before powering up the AMPLIFIER. NOTE: Visit our website at www.wilsonelectronics.com for the latest adapter cross reference chart.
6. OPTIONAL ACCESSORIES/ANTENNA OPTIONS 6.1 Coax Cable Extensions 50٠(see chart on pg.7) 6.2 Antenna Options (see chart on last page) 6.3 N-Female : To FME-Female Adapter - Adapts 9913 Coax to the 814001 Bi-directional Amplifier. 6.4 Lightning Suppressor (In-Building application) WARNING: Lightning protection is recommended for all In-Building installations. 6.5 Hardwire Power Supply Kit. �������� �� ���������� ���� ����� ��������� ����� ��� ���� ���� �������� ����� ������ ��� in-building installations.
8. TECH SUPPORT If you need further assistance with your installation: 1) Call us Toll-Free at 866-294-1660 2) E-mail tech support at tech@wilsonelectronics.com 3) Go to www.wilsonelectronics.com Our Hours of Operation are: 8:00 AM – 4:30 PM (Mountain Time) EXTENSION CABLE CHART (RG 58 - FME connectors / 9913 - N connectors) 951101 5’ Extension Cable RG 58 Low Loss Coax (0.6 db loss) 951102 10’ Extension Cable RG 58 Low Loss Coax (1.2 db loss) 951103 15’ Extension Cable RG 58 Low Loss Coax (1.
Outside Antenna Options For more options visit www.wilsonelectronics.com ���� ����������� ������������ ��� ��������� ����� Pictures Are Not To Scale Not All Outside Antenna Options Are Shown Questions? 1-866-294-1660 www.wilsonelectronics.