Specifications

1
Contact Wilson Electronics’s Technical Support Team with any questions at 866-294-1660
Or email: [e-mail] Mon.- Fri. Hours: 7am to 6 pm MST.
2
Installation Instructions for the Following Wilson Electronics Signal Boosters:
Mobile Wireless Dual-Band Smart Technology ™ Signal Booster
Part # 801201, 801212, 801212F
Model # 271201 FCC ID: PWO271201SA IC: 4726A-271201SA
Model # 273201 FCC ID: PWO273201 IC: 4726A-273201
Mobile Wireless Dual-Band Smart Technology ™ Signal Booster
Part # 801701, 801501, 801601, 801712
Model # 271701
NOT FOR SALE IN USA / CANADA
Signal Booster
DC plug-in
power supply
(301127)
Low-Profile
Antenna
(301104)
NMO
Mount
Dual-Band
(301103)
Magnet Mount
Dual-Band
(301101)
Trucker
Mount
Tri-Band
(301113)
Mini
Magnet
Dual-Band
(301130)
Marine
Antenna
Dual-Band
How it Works
Your new Wilson Signal Booster has been carefully engineered to significantly improve the performance
of your cell phone and cellular data card in mobile applications. Together with an Outside Antenna, the
Signal Booster’s state-of-the-art technology is designed to increase your signal more than 20 times,
reduces dropped calls and increase data communication rates needed for 3G technologies.
The Outside Antenna will collect the cell tower signal and send it through the cable to the Signal
Booster. The signal is then boosted and sent to the Inside Antenna. Your cellular device then
communicates with the improved signal. When the cellular device transmits, the signal goes through
the Inside Antenna, is boosted by the Signal Booster and transmitted to the cell tower through the
Outside Antenna.
Optional Antennas
(Included with
some kits)
(Included with
some kits)
Wilson Electronics manufactures a wide variety of antennas to help you customize your Signal Booster
for your specific application. Several authorized antennas are shown above. See your dealer or visit
www.WilsonElectronics.com.
(Included with
some kits)
The term “IC” before the radio certification number only signifies that Industry Canada
technical specifications were met.
Inside this Package
Appearance of device and accessories may vary.
Before Getting Started
This guide will help you properly install your Wilson Electronics Dual-Band Mobile Wireless Signal
Booster. It is important to read through all of the installation steps for your particular application
prior to installing any equipment. Read through the instructions, visualize where all the equipment
will need to be installed and do a soft installation before mounting any equipment. Contact Wilson
Electronics Technical Support Team with any questions at 866-294-1660.