Owner's Manual
Table Of Contents
- Installation Overview
- Installation Guide
- Index
- Package Contents
- STEP 1 Select Mounting Location & Assemble the Outside Antenna
- STEP 2 Mounting the Outside Antenna
- STEP 3 Mounting the Inside Antenna
- STEP 4 Connect Coax Cables to Booster
- STEP 5 Connect Power Supply to Booster
- Booster Light Patterns
- Troubleshooting
- Safety Guidelines
- Antenna Info
- Specifications
- Warranty
Booster Light Patterns
SOLID
GREEN
This indicates that
your
Drive Reach Booster is functioning properly and
there
are
no
issues with installation.
SOLID
RED
Band has shutoff. This is
due
to
a
feedback
loop
condition called oscillation. This is a
built in safety feature
that
causes a band
to
shut
off
to
prevent
harmful interference
with a nearby cell tower. Refer
to
Troubleshooting section.
BLINKING
RED,
THEN SOLID
GREEN
This indicates that
one
or
more
of
the
Booster bands has reduced
power
due
to
a
minor feedback
loop
condition called oscillation. This is a
built
in safety feature
to
prevent harmful interference with a nearby cell tower.
If
you
are already experiencing
the
desired signal boost,
then
no
further adjustments are necessary.
If
you are
not
experiencing
the
desired
boost
in coverage then refer
to
the
Troubleshooting section.
Light
Off
If
the
Drive Reach Signal Booster's light is
oft
verify
your
power
supply has power.
■