Owner's Manual
Table Of Contents
- User Manual
- Index
- Package Contents
- Step 1: Mount Outside Antenna & Route Cable
- Step 2: Connect Cable To Outside Antenna
- Step 3: Inside Antenna Location
- Step 4: Booster Location & Connect Cables
- Steps 5 & 6: Power Up The Booster
- Using The Optional Cable Entry Accessories
- Measuring Booster Performance
- Light Patterns
- Troubleshooting
- Antenna Kit Options
- Safety Guidelines
- Specifications
- Warranty
DRIVE X RV CELL PHONE SIGNAL BOOSTER
7
Fasten the end with smaller SMA connection to the ‘Outside
Antenna’ port on the booster.
be sure to
finger tighten only
be sure to
finger tighten only
______
(STEP 4: BOOSTER LOCATION & CONNECT CABLES cont.)
from Outside Antenna
route to Inside Antenna
Connect the 13’ RG-58 cable to the ‘Inside Antenna’ port on
the booster. Route the cable to the Inside Antenna.