Owner's Manual
Table Of Contents
- User Manual
- Index
- Package Contents
- Step 1: Mount Outside Antenna & Route Cable
- Step 2: Connect Cable To Outside Antenna
- Step 3: Inside Antenna Location
- Step 4: Booster Location & Connect Cables
- Steps 5 & 6: Power Up The Booster
- Using The Optional Cable Entry Accessories
- Measuring Booster Performance
- Light Patterns
- Troubleshooting
- Antenna Kit Options
- Safety Guidelines
- Specifications
- Warranty
6
CELL PHONE SIGNAL BOOSTER DRIVE X RV
______
Step 4: Booster Location &
Connect Cables
Find a location to place the booster, then mount by
removing the bracket from back side of booster and fasten
to desired surface. Snap booster back into bracket.
common booster
location
NOTE: We recommend mounting in a cabinet near a power source. Be sure it’s in a
location that cables from both Inside and Outside Antennas can reach.