Installation Instructions

May 13, 2020
Tuning and Adjustment of Wilson Model 460064 Signal Booster
Model 460064 Signal Booster
Tuned Frequency
(MHz)
Target
Gain (dB)
Maximum Gain
(dB)
Target Power
(dBm)
Maximum Power
(dBm)
Uplink
663-698
85
85
24.2
24.2
Downlink
617-652
85
85.5
24.5
24.5
There are no external tuning adjustments. The amplifier is factory set to not exceed maximum gains,
power levels, and downlink dependent region (RSSI) set points as provided in the test results. It is
designed with advanced internal programming, which allows it to automatically adjust for a variety of
conditions, while still amplifying weak signals.
Tune-up Procedure:
1. Once the antennas and antenna cables are connected, turn the unit on by connecting the
power supply cord, at the bottom. A Wilson Lightning Surge Protector is recommended for all
building installations. Make sure the protector is installed outside the building. Connect it to
suitable ground and in line, between the Outside Antenna and the Signal Amplifier.