Installation Guide

PRO 710i INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER
7
The Pro 710i takes about 5 seconds to boot up. Once boot up is complete, the home
screen will appear, showing the amplification and status of each port and band.
A solid green color indicates that a band
is operating correctly with maximum
allowable gain.
A solid yellow color indicates band gain
reduction because of an oscillation
condition. Reposition antennas (increase
separation between indoor and outdoor
antennas, and point in opposite directions)
and then reboot (turn the unit o & on)
the Pro 710i to reactivate the band and
maximize performance. When adequate
separation is achieved, the yellow color
will return to green upon reboot.
Note: when the colro is yellow, the band
is operational; however, performance
is reduced.
Start Up Screen
Band Menu Color Description
Menu System