A Wilson Electronics Brand WILSON PRO 1000 In-Building Signal Booster With Extended Dynamic Range User Manual NEED HELP? wilsonpro.com 866.294.
_____ Index Package Content 1 About The WilsonPro 1000 2 Key Features 4 Competitive Advantages 5 Post Install Setup 7 Status Screen 8 Port/Band Status Screens 10 Enable/Disable Ports 12 Safety Guidelines 13 Warranty 17
________ Package Content Kit 460223 WilsonPro 1000 Pair of 2-Way Radios Wide Band Directional Antenna + 75’ Wilson 400 Cable 2’ Wilson 400 Dome Antenna + 100’ Wilson 400 Cable Lightning Surge Protector WILSON PRO 1000 IN-BUILDING SIGNAL BOOSTER 1
WilsonPro 1000 Easy Installation Neat and clean installation while leaving the unit easily accessible. Onboard Software For Better Control Automatically controlled with onboard software, ensuring great connectivity throughout large spaces and multi-story buildings. Extended Dynamic Range For Continuous Connectivity XDR allows the booster to never shutdown due to too strong of a signal. No matter how strong, the booster will never overpower and shutdown.
Designed to provide enhanced in-building cellular coverage for commercial and large residential spaces, the WilsonPro 1000 amplifies weak cell signals to provide reliable voice and data coverage – including 4G – to inside spaces where signals may not penetrate. Like all WilsonPro cellular signal boosters, the WilsonPro 1000 features cell site protections that auto-detect and prevent any cell tower interference.
____________ Key Features Onboard Software for Better Control: Each indoor antenna path is independently and automatically controlled with onboard software, ensuring great connectivity throughout large spaces and multi-story buildings. Since all ports are independently controlled, each can adjust its gain level up or down as required by the conditions of the immediate signal environment without disrupting coverage from any other antenna.
___________ Competitive Advantages Highest Downlink Power: Up to +12dB more downlink power than the competition allows for stronger signal in environments where the incoming signal is weak. The benefit is a stronger signal sent to the inside antennas, providing larger coverage area from a single booster. Highest Uplink Power: This allows for a stronger signal transmitted to the tower, up to +3dB more than the competition, providing greater user capacity and increased range from the cell site.
__________ Post Install Setup The WilsonPRO 1000 is designed with advanced internal programming, which allows it to automatically adjust for a variety of conditions, while still boosting weak signals. Once the AC power cable and antenna cables are connected, turn the unit on by toggling the power switch located near the AC power receptacle.
____________ Status Screen The 1000 takes about 20 seconds to boot up. Once boot up is complete, the status screen will appear, showing the amplification and status of each port and band. System Status Screen Splash Screen Lights Description A solid green light indicates that a band/port is operating correctly with maximum allowable gain. A solid yellow light indicates band/ port gain reduction because of an oscillation condition.
________ (LIGHTS DESCRIPTION cont.) A red light indicates a band/port which has been completely shut down because of a severe oscillation condition or repeated oscillation events. Reposition antennas (more separation between indoor and outdoor antennas, and pointed in opposite directions) and then reboot (power cycle) the 1000 to reactivate the band/port and maximize performance. When adequate separation is achieved, the red light(s) will return to green upon reboot.
______________ Port/Band Status Screens Green Light By pressing enter on a highlighted light, as shown, a more detailed status screen will be displayed for the highlighted band/port. D-Pad with Enter button Status Screen Close-up This screen provides specific band and port information. Including the strength of the received uplink and downlink signal, status details, and the amplifier gain.
___________ (PORT/BAND STATUS SCREENS - GREEN LIGHT cont.) In the presence of a strong outdoor cell tower signal, the 1000 will reduce it’s “boost” (Gain) using internal Automatic Gain Control (AGC). This gain reduction is necessary to stay within FCC requirements.
_____________ Enable/Disable Ports To return to the Status Screen press the ENTER button on the D-Pad Unused indoor antenna ports should be enabled/disabled by pressing enter on the applicable port, from the status screen. D-Pad with Enter button Status Screen Close-up ‘Disabled’ will be displayed on the applicable port, as shown.
______________ Safety Guidelines Warnings o uphold compliance with network protection standards, all active cellular devices must maintain T at least 6 feet of separation distance from Panel and Dome antennas. Use only the power supply provided in this package. Use of a non-Wilson Electronics product may damage your equipment. The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 100 degrees Fahrenheit).
_________________ Antenna Kit Options The following accessories are certified by the FCC to be used with the Wilson PRO 1000.
___________ Specifications Product Number U460036 Model Number 460036 FCC ID PWO460036 IC ID 4726A-460036 Connectors N-Female Antenna Impedance 50 Ohms Frequency 698-716 MHz, 729-746 MHz, 777-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz Passband Gain (nominal) 700MHz Band12/17 57.6 700MHz Band13 58.0 800MHz 59.2 1700/2100MHz 65.7 1900MHz 65.2 700MHz Band12/17 700MHz Band13 800MHz 1700/2100MHz 1900MHz 20 dB Bandwidth (MHz) 29.6 35.4 30.3 35.4 36.8 37.8 77.5 81.
____________ Notes 16 IN-BUILDING SIGNAL BOOSTER WILSON PRO 1000
________ Warranty 30 DAY MONEY-BACK GUARANTEE All WilsonPro products are protected by WilsonPro 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 3 YEAR WARRANTY WilsonPro Boosters are warranted for three (3) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.
A Wilson Electronics Brand 3301 East Deseret Drive, St. George, UT www.wilsonpro.com | support.wilsonpro.com Copyright © 2016 Wilson Electronics. All rights reserved. Wilson Electronics products covered by U.S. patent(s) and pending application(s) For patents go to: weboost.com/us/patents NOT AFFILIATED WITH WILSON ANTENNA WilsonPro 1000_RevP_01.04.
