User's Manual
CELL PHONE SIGNAL BOOSTER
7
5. If the solid orange light persists, and you are not experiencing the desired
signal boost, more advanced troubleshooting may be necessary through
weBoost Customer Support at support.weboost.com or contact 866.294.1660.
Light O
If the eqo ooster’s light is off, verify your surge protected power strip has power.
Note: The eqo ooster can be reset by un-plugging and re-plugging the power
supply from the power strip.
Green Light, But Poor Coverage
After each step, always un-plug and re-plug the power supply so the ooster can
update the signal reading. Always un-plug and re-plug from a power strip NEVER
from the Booster.
1 Increase separation between ntenna and ooster. Un-plug and re-plug power
supply from power strip.
2 Rotate the ooster in small increments 5-10 degrees at a time. Un-plug and re-plug
power supply from power strip.
3 Move the ooster to a dierent location. The stronger the signal at the Booster
location, the better chance of improved coverage from the Antenna. Un-plug and
re-plug power supply from power strip.
4 To determine what your signal is like before and after you power on the Booster,
refer to STEP 1 on page 2 - Find he dBm eading n our hone.
Unable To Get Coverage Needed
If you are unable to get the coverage area needed, contact Customer Support for a
FREE external antenna kit.
______
(TROUBLESHOOTING cont.)