User's Manual

CELL PHONE SIGNAL BOOSTER
5
2
Connect the other end of the Coax
Cable to the Antenna.
Note: You can mount the Antenna on a
wall by removing the soft cover.
3
Plug the Booster in. The light may
change colors for the first 15 seconds.
Check your coverage area. efer
to TROUBLESHOOTING section if
needed.
Note: When repowering the Booster
always un-plug and re-plug from a
urge rotector ower trip. NEVER
from the Booster.
______
Step 4: Connect The System
Coax Cable
Coax Cable
Wall Mount Hole
Surge Protector
Power Strip
Power Cable
1
Connect the supplied Coax Cable and
Power Supply on the side of the
Booster.