User's Manual

3
4
Contact Wilson Electronics Customer Support Team with any questions
at 866-839-9361 or email: [e-mail].
6. Before powering up the signal booster, verify that both the outside antenna and
the inside antennas are connected correctly, and check that all connections are
tight. Note: Be careful when plugging the connectors in so as not to bend the
center pins on the connectors.
7. Power on the signal booster by plugging in the included power supply. If the
lights are not green, please refer to pages 9-11.
1 2 3 4
Connect up to 4 indoor
panel antennas for
added coverage
Outdoor Antenna
To Inside Antennas
The outdoor antenna must be mounted at
a location outside of the home or building,
where the strongest cell signal is present.
Installation Diagram