Mobile 4G™ Cellular Signal Booster 460021 Need help? www.WilsonElectronics.com Tech Support 866-294-1660 Mon.- Fri.
! THE ALUMINUM CASING OF YOUR SIGNAL BOOSTER WILL ADJUST TO THE TEMPERATURE OF ITS ENVIRONMENT, BUT IS DESIGNED TO PROTECT THE SIGNAL BOOSTER TECHNOLOGY. FOR EXAMPLE, IN THE SUMMER, THE SIGNAL BOOSTER CASE MAY BE AS HOT AS 150 DEGREES INSIDE YOUR VEHICLE. THESE HIGH TEMPERATURES WILL NOT DAMAGE THE SIGNAL BOOSTER, NOR DO THEY POSE A FIRE RISK TO THE VEHICLE. AGAIN, BE SURE TO PLACE YOUR SIGNAL BOOSTER IN A LOCATION WITH ADEQUATE VENTILATION AND AWAY FROM DIRECT SUNLIGHT OR MOISTURE.
Package Contents Mobile 4G™ Signal Booster Mini-Mag Outside Antenna 301126 Slim Low Profile Inside Antenna 301152 DC Power Supply 6V / 2A 859913 Optional Antennas 12” Mag Mount Outside Antenna 311103 NMO Outside Antenna 311104-5810 Marine Outside Antenna 311130-5810 Trucker Outside Antenna 311101 Appearance of device and accessories may vary.
The outside antenna must be installed vertically on a metallic surface. • When you have tested the functionality of your Mobile 4G Signal Booster, mount the inside antenna by peeling off the backing of the Velcro® and attach it to your selected location on the seat and secure the inside antenna. 4. Place and connect the Mobile 4G Signal Booster. 2. Run the outside antenna cable into the car. The cable is strong enough that it may be shut in most vehicle doors without damaging the cable.
• Power up your Signal Booster by flipping the switch on the back of the DC power adapter on. A red light should appear on the power adapter. Note: T he Mobile 4G Signal Booster may remain on, in vehicles whose 12V DC power sources do not automatically shutdown when the vehicle is turned off. This could result in discharging the vehicles battery in one to two days. Note: S ome 12V DC power sources are shut down when the vehicle ignition is turned to off.
Green light: A green light indicates the Mobile 4G Signal Booster is working properly. If you have additional questions about the operation of your Mobile 4G Signal Booster, please contact the Wilson Electronics technical support team at 866-294-1660 or email tech@ wilsonelectronics.com. Additional FAQ: What hours can I contact tech support? Technical Support can be reached from 7:00am to 6:00pm MST, by calling (866-294-1660), or by email, at tech@ wilsonelectronics.
Kit 314411-5825 • 50 Ohm Wide Band Directional • 25’ RG58 Cable Kit 301111-5850 • Yagi Directional Antenna • 50’ RG58 Cable Kit 311129-5840 • 8000 MHz Yagi Directional • 40’ RG58 Cable Kit 311203-5820 • Omni-Directional antenna • 20’ RG58 Cable Kit 311124-5830 • 1900 MHz Yagi Antenna • 30’ RG58 Cable Kit 311203-40020 • Omni-Directional antenna • 20’ LMR400 Cable Kit 301111-400170 • Yagi Directional w/ N-Female • 170’ LMR400 Kit 311124-400100 • 1900 MHz Yagi Directional • 100’ LMR400 Cable Kit 311129-400100
Mobile Antennas Mini-Mag • 301126 w/ 12.5 RG174 cable- SMA • 301113 w/ 12.5 RG174 cable- FME 12” Mag Mount w/ 12.5’ RG174 • 311103 • 311125 • 311128 • 311703 Trucker antenna w/10.
Signal Booster Specifications Mobile 4G Model Number 460021 Connectors SMA Antenna Impedance 50 Ohms Frequency 698-716 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz 700 MHz Band 12/17 45.8 700 MHz Band 13 46.8 800 MHz 46.8 1700/2100 MHz 45.2 1900 MHz 44.6 700 MHz Band 12/17 700 MHz Band13 800 MHz 1700/2100 MHz 1900 MHz 30.6 35.2 31.0 35.2 37.9 39.9 79.2 79.8 77.3 83.
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson Electronics 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 2-Year Warranty Wilson Electronics Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials.
