User's Manual

HOME 4G CELL PHONE SIGNAL BOOSTER

If needed, remove the lid. Remove the back

bracket. See 13.1

Use the provided double sided sticky tape to re-

attach the lid.

Slip the Outside Antenna into the Window Mount

Bracket. Clean the window with the alcohol wipe.

Suction cup to the inside of the window. See 13.2.

The skinny side of the Outside Antenna must face

outside, toward the cell tower. If the skinny side

of the Outside Antenna faces inside, towards the

Booster, the system will not work. See 13.3.

______

Step 5: Mount Outside Antenna

Option C: Inside Window Mount - OK Signal Option

You will need (tools not included)

5-10 minutes 1 person Phillips-head screwdriver

13.1

13.2

13.3

IMPORTANT: Energy ecient window coatings may not make this option

viable. Typically, the Outside Antenna must be in a dierent room than

the inside antenna due to the separation requirements.

Skinny

Fat