User's Manual

HOME 4G CELL PHONE SIGNAL BOOSTER

Fix Any Orange Light Problems (orange indicates a cell

tower is close by)

• If you are happy with coverage, orange lights don’t have to be resolved

• Solid Orange = Band has shut o

• Blinking Green/Orange = Band has reduced gain.

1. If the light is solid orange, the Outside Antenna must be adjusted (see below). Wait

10 seconds between adjustments for the lights to reset.

• For Roof/Pole Mount Option = Rotate the Outside Antenna away from the

strongest cellular signal in small increments (45°) until the light turns green. Un-

plug and re-plug power supply.

• For All Other Mount Options = Change mount location. For example, if the Outside

Antenna is a window mount, move the Outside Antenna to a wall outside the

building to see if the lights turn green. Un-plug and re-plug power supply.

2. If the light is blinking green/orange, re-locate the Outside Antenna. Un-plug and

re-plug power supply.

All Green Lights? = Band is set up correctly. Verify you

have good coverage.

If you have green lights, but poor coverage:

After each step, un-plug and re-plug the power supply

so the booster can update the signal reading.

• Increase separation between Inside and Outside Antennas. Un-plug and re-plug

power supply.

• Rotate the Outside Antenna in small increments (roof/pole mount only). Un-plug

and re-plug power supply.

• Move the Outside Antenna to a dierent location. Un-plug and re-plug power

supply.

• Change the method of mounting the Outside Antenna. Un-plug and re-plug power

supply.

NEED HELP?

support.weboost.com 866.294.1660