User's Manual

9
Need help? www.WilsonElectronics.com
Tech Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
Signal Booster Specifications
MobilePro
®
Model Number 460013
Connectors SMA
Antenna Impedance 50 Ohms
Frequency 824-894 MHz/1850-1990 MHz
Passband Gain (nominal)
800 MHz
40.8
1900 MHz
41.7
20 dB Bandwidth (MHz)
800 MHz 1900 MHz
Typical
Maximum
40.4
41.5
83.3
84.6
Power output for single cell phone (dBm)
800 MHz 1900 MHz
Uplink
Downlink
26.9
-3.5
26.2
2.2
Power output for multiple received channels
(Uplink) dBm
No. Tones
800 MHz 1900 MHz
2 25.8 18.5
3 22.3 14.9
4 19.8 12.4
5 17.9 10.5
6 16.3 8.9
Power output for multiple received channels
(Downlink) dBm
No. Tones
800 MHz 1900 MHz
2 -5.2 0.9
3 -8.7 -2.6
4 -11.2 -5.1
5 -13.1 -7.1
6 -14.7 -8.7
Noise Figure (typical downlink/uplink) 3 dB nominal
Isolation > 90 dB
Power Requirements 5 V 1.5 A
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating
would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power
reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.