MobilePro ® Cellular Signal Booster 460113 Need help? www.WilsonElectronics.com Tech Support 866-294-1660 Mon.- Fri.
! IT IS VERY IMPORTANT TO POWER YOUR SIGNAL BOOSTER USING A SURGE PROTECTED AC POWER STRIP WITH AT LEAST A 1000 JOULE RATING. FAILURE TO DO THIS WILL VOID YOUR WARRANTY IN THE EVENT OF A POWER SURGE OR LIGHTNING STRIKE. ! THE SIGNAL BOOSTER UNIT IS DESIGNED FOR USE IN AN INDOOR, TEMPERATURECONTROLLED ENVIRONMENT (LESS THAN 150 DEGREES FAHRENHEIT). IT IS NOT INTENDED FOR USE IN ATTICS OR SIMILAR LOCATIONS SUBJECT TO TEMPERATURES IN EXCESS OF 150°F.
Package Contents Carrying case included Wireless Signal Booster Mini-Magnet Mount Antenna (301126) Antenna Window Mount (901128) USB power cable with power power adapter (859963) AC DC Power Supply (859969) Appearance of device and accessories may vary.
3. Attach the Adhesive Mounting Bracket to the vehicle’s dashboard. • Clean the area where the bracket is to be mounted with the alcohol wipe included. Allow the area to dry. 5. Attach the antenna cable to the antenna connector on the bottom of the signal booster. The antenna cable must be connected before going to the next step. • Peel the backing to expose the adhesive and press the bracket onto the desired location on the dashboard. NOTE: Be sure the tab is positioned vertically.
Installation Options In-Building Installation Option 1. Install the antenna to a window. These instructions are for use with the Wilson Electronics Magnet-Mount or Mini-Magnet Mount Antenna. If you purchased a different antenna separately, follow the instructions included with that antenna. • S elect a window on the side of the building where you get the strongest cell signal. You can determine the strongest signal area by walking around the building and checking the bars on your mobile phone.
Understanding the MobilePro Signal Booster Light The light on the front of the MobilePro signal booster indicates whether the system is working or if there are problems. Take the following steps based on the indicator light color when using the MobilePro signal booster. Light off: If the light is not on: • Check connections on the power supply to see that it is firmly plugged into both the signal booster and the power source.
Antenna Kit Options Mini-Mag 301126 w/12.5 RG174 cable-SMA 301113 w/12.5 RG174 cable-FME 12” Mag Mount 311103 w/12.5’ RG174 311125 w/12.5’ RG174 311128 w/12.5’ RG174 314202 w/12.5’ RG174 311703 w/12.5’ RG174 Trucker Antenna 311101 w/10.5’ RG58 311701 w/10.5’ RG58 311119 w/13.5’ RG58 311133 w/13.
Safety and Recommendations WARNING: C onnecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone. WARNING: Use only the power supply provided in this package. Use of a non-Wilson Electronics product may damage your equipment. WARNING: The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 150 degrees Fahrenheit).
Signal Booster Specifications MobilePro® Model Number 460013 Connectors SMA Antenna Impedance 50 Ohms Frequency 824-894 MHz/1850-1990 MHz Passband Gain (nominal) 20 dB Bandwidth (MHz) Typical Maximum Power output for single cell phone (dBm) 800 MHz 40.8 1900 MHz 41.7 800 MHz 1900 MHz 40.4 41.5 83.3 84.6 800 MHz Uplink Downlink 1900 MHz 26.9 -3.5 26.2 2.2 800 MHz 1900 MHz 2 25.8 18.5 3 22.3 14.9 4 19.8 12.4 5 17.9 10.5 6 16.3 8.
Notes: 10 Need help? www.WilsonElectronics.com Tech Support 866-294-1660 Mon.- Fri.
Notes: 11 Need help? www.WilsonElectronics.com Tech Support 866-294-1660 Mon.- Fri.
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson Electronics 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 2-Year Warranty Wilson Electronics Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials.
