MobileMaxx 3G™ Cellular Signal Booster 460011 Need help? www.WilsonElectronics.com Tech Support 866-294-1660 Mon.- Fri.
! THE ALUMINUM CASING OF YOUR SIGNAL BOOSTER WILL ADJUST TO THE TEMPERATURE OF ITS ENVIRONMENT, BUT IS DESIGNED TO PROTECT THE SIGNAL BOOSTER TECHNOLOGY. FOR EXAMPLE, IN THE SUMMER, THE SIGNAL BOOSTER CASE MAY BE AS HOT AS 150 DEGREES INSIDE YOUR VEHICLE. THESE HIGH TEMPERATURES WILL NOT DAMAGE THE SIGNAL BOOSTER, NOR DO THEY POSE A FIRE RISK TO THE VEHICLE. AGAIN, BE SURE TO PLACE YOUR SIGNAL BOOSTER IN A LOCATION WITH ADEQUATE VENTILATION AND AWAY FROM DIRECT SUNLIGHT OR MOISTURE.
Package Contents Kit Configuration Wilson Electronics manufactures a wide variety of antennas to help you customize your Signal Booster for your specific application. See your dealer or visit www.WilsonElectronics.com for more information. Signal Booster 12” Mag Mount w/12.5’ RG174 (311125) Slim Low Profile w/10’ RG174 (301152) Power Supply 12V / 3.
• At least 8 inches from any people. The Outside Antenna must be installed vertically on a metallic surface. 4. Place and connect the MobileMaxx 3G Signal Booster. • Select a location for the Signal Booster that is free from excessive heat, direct sunlight and moisture and that has proper ventilation. Good locations include underneath a seat or under the dashboard. • Connect the wire from the Outside Antenna to the port labeled “Outside Antenna” on the Signal Booster. 2.
may be as hot as 150 degrees inside your vehicle. These high temperatures will NOT damage the Signal Booster, nor do they pose a fire risk to the vehicle. Again, be sure to place your Signal Booster in a location with adequate ventilation and away from direct sunlight or moisture. Troubleshooting & Understanding Lights The lights on the top of the Signal Booster indicate whether the system is working or if there are problems. The light on the left is the power light.
Mobile Antenna Kit Options Fixed Antenna Kit Options INSIDE ANTENNA OPTIONS Slim Low Profile 301152 - w/ 10’ RG174 INSIDE ANTENNA OPTIONS Low Profile 311106 - w/ 10’ RG58 OUTSIDE ANTENNA OPTIONS Mini-Mag 301126 w/ 12.5 RG174 cable- SMA 301113 w/ 12.5 RG174 cable - FME 12” Mag Mount 311103 w/ 12.5’ RG174 311125 w/ 12.5’ RG174 311128 w/ 12.5’ RG174 314202 w/ 12.5’ RG174 Trucker Antenna 311701 w/10.5’ RG58 Trucker Antenna 311119 w/13.5’ RG58 311133 w/13.5’ RG58 Marine Antenna 311130-5810 w/10.
Safety Guidelines Warning: In a wireless installation, do not plug the Signal Booster directly into the cell phone or cellular data card using an antenna adapter. It will damage the Signal Booster, cell phone or cellular data card. Warning: Do not plug in the DC power supply until the Outside and Inside Antenna cables are attached to the Signal Booster. Warning: Warning: The Inside Mobile Antennas must have 1.
Notes: _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _________
Signal Booster Specifications MobileMaxx 3G Model Number 460011 Connectors SMA Antenna Impedance 50 Ohms Frequency 824-894 MHz and 1850-1990 MHz Passband Gain (nominal) 800 MHz 47.8 1900 MHz 44.2 20 dB Bandwidth (MHz) 800 MHz 1900 MHz 37.8 39.4 79.4 80.4 Typical Maximum Power output for single cell phone (dBm) 800 MHz Uplink Downlink Power output for multiple received channels (Uplink) dBm No. Tones 1900 MHz 29.0 -7.9 27.1 0.7 800 MHz 1900 MHz 2 26.7 24.2 3 23.2 20.6 4 20.
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson Electronics 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 2-Year Warranty Wilson Electronics Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials.
