User's Manual

5
Need help? www.WilsonElectronics.com
Tech Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
 •IfusingaDCpowersupplyinyour
vehicle, ensure the power supply is
properly inserted. Then check the 12 volt
power from the car socket and the fuse.
Replace the fuse if necessary.
 •Ifusingapowerstripinabuilding,
ensure the power strip is plugged in and
turned on and that power is coming from
the outlet.
Red light: An red light indicates the Sleek
4G has powered down to protect the cell
tower. Separation between the Sleek 4G and
the Outside Antenna is important to prevent
oscillation (feedback), similar to when a
microphone is too close to a speaker. When
oscillation occurs, the Sleek 4G shuts down in
order to prevent interference in the cell tower.
If the light is red, move the Outside Antenna
farther away from the Sleek 4G. On a vehicle,
that usually means moving it farther toward the
back of the car. Remember to keep the antenna
at least 6 inches from any window or sunroof.
Adjusting the Sleek 4G Arms
Various sized arms are included with your Sleek
4G. These provide you with options to customize
theSleek4Gtotvirtuallyanycellphone.
 •Tochangearms,gentlyliftthearm
upward until the arm slides free from the
Sleek 4G.
 •Torepositionarms,movethearmabove
a different slot on the Sleek 4G and
gently slide the arm down until the arm
isrmlyinplace.
Troubleshooting
Understanding the Sleek 4G Lights
The light on the side of the Sleek 4G indicates
whether the system is working or if there are
problems. Take the following steps based on the
indicator light color when using the Sleek 4G.
Light off: If the light is not on:
 •Checkconnectionsonthepowersupply
toseethatitisrmlypluggedintoboth
the Sleek 4G and the power source.
Understanding the Sleek 4G Light
Inanofce,movethelocationoftheSleek4G
farther from the window where the antenna
is mounted. Once you have separated the
Outside Antenna and the Sleek 4G, reset the
Sleek 4G by disconnecting the power and then
reconnecting the power supply. If the light is
green, the Sleek 4G is working properly. If the
amber light is still on, move the Outside Antenna
farther away and repeat the process.
Green light: A green light indicates the Sleek
4G is working properly.