Sleek 4G ® Cellular Signal Booster 460007/460107 Need help? www.WilsonElectronics.com Tech Support 866-294-1660 Mon.- Fri.
! IT IS VERY IMPORTANT TO POWER YOUR SIGNAL BOOSTER USING A SURGE PROTECTED AC POWER STRIP WITH AT LEAST A 1000 JOULE RATING. FAILURE TO DO THIS WILL VOID YOUR WARRANTY IN THE EVENT OF A POWER SURGE OR LIGHTNING STRIKE. ! THE SIGNAL BOOSTER UNIT IS DESIGNED FOR USE IN AN INDOOR, TEMPERATURECONTROLLED ENVIRONMENT (LESS THAN 150 DEGREES FAHRENHEIT). IT IS NOT INTENDED FOR USE IN ATTICS OR SIMILAR LOCATIONS SUBJECT TO TEMPERATURES IN EXCESS OF 150°F. Contents Package Contents. . . . . . . . . .
Installation Options Option 1: Vehicle Installation 1. Attach the Mounting Bracket to the vehicle’s dashboard. • Clean the area where the bracket is to be mounted with the alcohol wipe included. Allow the area to dry. • Peel the backing to expose the adhesive and press the bracket onto the desired location on the dashboard. NOTE: Be sure the tab is positioned vertically. • Allow the adhesive to cure for 24 hours before you attach the Sleek 4G (Step 4). 4.
6. Power up your Sleek 4G. Connect the power cable to the mini-USB port on the bottom of the Sleek 4G. Then insert the adapter into the vehicle 12V DC power source. Use only the supplied Wilson Electronics power supply. While the Sleek 4G may remain on, leaving the Sleek 4G on in a vehicle when it is not running may discharge the battery in a day or two. Also note that some 12V DC power sources are shut down when the vehicle ignition is turned to off.
Adjusting the Sleek 4G Arms Various sized arms are included with your Sleek 4G. These provide you with options to customize the Sleek 4G to fit virtually any cell phone. • To change arms, gently lift the arm upward until the arm slides free from the Sleek 4G. • To reposition arms, move the arm above a different slot on the Sleek 4G and gently slide the arm down until the arm is firmly in place. • If using a DC power supply in your vehicle, ensure the power supply is properly inserted.
Additional FAQ: What hours can I contact tech support? Technical Support can be reached from 7:00am MST to 6:00pm MST, by calling (866-294-1660), or by email, at tech@wilsonelectronics.com How does weather affect the performance of my Outside Antenna? Water vapor (e.g. rain, fog, snow or other precipitation) creates an effective filter to cellular signal. In times of heavy precipitation, you may see less performance.
Safety and Recommendations WARNING: C onnecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone. WARNING: Use only the power supply provided in this package. Use of a non-Wilson Electronics product may damage your equipment.
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson Electronics 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 2-Year Warranty Wilson Electronics Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials.
