User's Manual
6
Installing a Wilson External Adapter
An 18-inch external adapter is required to connect the cell phone or cellular data card to
the amplier. The external adapter is cell phone/data card-specic and may be purchased
through a local retailer.
Refer to Wilson’s Adapter Guide to identify
the right adapter for your cell phone or
cellular data card. The adapter guide is
available through a local retailer or visit
www.wilsonelectronics.com.
The external adapter plugs into the included antenna extension cable and directly into a
socket on the cell phone or cellular data card as shown in Figure 1.
The external adapter and the included extension cable are long enough to reach the
amplier location. This allows for ease and convenience of use.
Run the extension cable from the external adapter and attach it to the FME-Male connector
labeled “cellular phone” on the amplier.
Sample
adapter
NOTE: Depending on your specic cell phone, the
adapter socket may be located beneath a rubber
plug.
Figure 1
In-Vehicle