User's Manual
3
Before Getting Started
This guide will help you properly install Wilson’s direct connection ampliers in both in-
vehicle and in-building applications. It is important to read through all of the installation
steps for your particular application prior to installing any equipment. Read through
the instructions, visualize where all the equipment will need to be installed and do a soft
installation before mounting any equipment. If you do not understand the instructions in
full, seek professional help, or contact Wilson Technical Support at 866-294-1660.
Inside this Package
• Direct connection amplier
• DC plug-in power supply with On/Off switch
• 6 ‘ extension cable
Additional Equipment
• Outside antenna for in-vehicle or in-building use (required)
(NOTE: specically tuned iDEN antennas available)
• Cell phone-specic external antenna adapter (required)
• AC/DC power supply (optional – for in-building use)
How it Works
Wilson ampliers are small, portable, bi-directional devices that deliver service levels
consistent with what would be expected in areas of high cell network coverage. They
amplify a weak or shadowed signal in mobile, marine and in-building applications.
When using a Wilson amplier in conjunction with Wilson antennas, the outside antenna
will collect the cell tower signal and send it through the cable to the amplier. Cell phones
and cellular data cards (laptops) then communicate with the improved signal. When a cell
phone or cellular data card transmits, the signal is amplied by the amplier and broadcast
back to the cell tower through the outside antenna.
Direct connection
amplier
6‘ extension
cable
DC plug-in power
supply