User's Manual

1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail]. Mon.- Fri. Hours: 7 am to 6 pm MST.
2
Installation Instructions for the Following
Wilson Electronics Signal Booster:
iDEN 800 MHz Adjustable Gain In-Building Wireless
Smart Technology ™ Signal Booster
How it Works
Wilson Electronics Signal Boosters are bi-directional devices that deliver
service levels consistent with what would be expected in areas of high
cell network coverage. They amplify a weak or shadowed signal in
mobile, M2M, marine and in-building applications. When using a Wilson
Electronics Signal Booster in conjunction with Wilson Electronics
antennas, the Outside Antenna will collect the cell tower signal and send
it through the cable to the Signal Booster. The signal is then amplified
and re-transmitted through the Inside Antenna into the room. Cell
phones and cellular data cards in that area then communicate with the
improved signal. When a cell phone or cellular device transmits, the
signal is received by the Inside Antenna, amplified by the Signal Booster
and transmitted back to the cell tower through the Outside Antenna.
Inside this Package
Signal
Booster
7V AC/DC
Power Supply
(included in some kits)
To purchase, call Wilson Electronics Sales Department at: 800-204-4104
Outdoor Antenna Options
Indoor Antenna Options & Accessories
1. 800 MHz Yagi Antenna (301111)
2. 800 MHz Yagi Cellular Antenna (301129)
3. Wide Band Directional Antenna
700 - 2700 MHz (304411)
4. Outdoor Panel Antenna
700-2700 MHz (301157)
A. Wide-Band Panel Antenna 700-2700MHz (301134 & 301135)
B.
50 Ohm Lightning Surge Protector with N-Connectors
(859902)
Splitter options on page 8
3
1
2
B
A
4
Note: Kits may contain different accessories
Appearance of device and accessories may vary.
Model #274080 FCC ID: PWO274080 IC: 4726A-274080