User's Manual

1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail]. Mon.- Fri. Hours: 7 am to 6 pm MST.
2
Installation Instructions for the Following Wilson
Electronic Signal Booster:
AG Pro
™
Quint Selectable
(Band 2, 4, 5, 12 & 13) 700 / 800 / 1700-2100 / 1900 MHz
In-Building Wireless Smart Technology
™
Signal Booster
Model #273470 FCC: PWO273470
How it Works
Wilson Electronics Signal Boosters are bi-directional devices that deliver
service levels consistent with what would be expected in areas of high cell
network coverage. They amplify a weak or shadowed signal in mobile,
M2M, marine and in-building applications. When using a Wilson Electronics
Signal Booster in conjunction with Wilson Electronics antennas, the
Outside Antenna will collect the cell tower signal and send it through
the cable to the Signal Booster. The signal is then amplified and re-
transmitted through the Inside Antenna into the room. Cell phones and
cellular data cards in that area then communicate with the improved
signal. When a cell phone or cellular device transmits, the signal is
received by the Inside Antenna, amplified by the Signal Booster and
transmitted back to the cell tower through the Outside Antenna.
Inside this Package
Signal
Booster
AC/DC
Power Supply
5V / 4A
(859998)
To purchase, call Wilson Electronics Sales Department at: 800-204-4104
We recommend using directional antennas with this Signal Booster.
Outdoor Antenna Options & Accessories
Indoor Antenna Options & Accessories
1. Wide Band Directional Antenna 700 - 2700 MHz
(304411) Note: The outside fixed antenna must be
connected with a minimum of 26’ of RG58 coaxial
cable (950630}.
2. Pole Mount Wide Band Panel Antenna (304453)
A. Wide-Band Panel Antenna 700-2700 MHz
(multiple mounting options available)
B. 50 Ohm Lightning Surge Protector N Connector
(859902)
Splitter options on page 9
2
1
B
A
Note: Kits may contain different accessories
Appearance of device and accessories may vary.