User's Manual

1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail]. Hours: 7 am to 6 pm MST.
2
Installation Instructions for the Following
Wilson Signal Booster:
AWS 70 Band 4, 70 dB Adjustable Gain In-Building
Wireless Smart Technology ™ Signal Booster
Model # 272365
FCC ID: PWO272365 IC: 4726A-272365
The term “IC” before the radio certification number only signifies that Industry Canada
technical specifications were met.
How it Works
Wilson Electronics Signal Boosters are bi-directional devices that
deliver service levels consistent with what would be expected in areas
of high cell network coverage. They amplify a weak or shadowed
signal in mobile, marine and in-building applications. When using
a Wilson Electronics Signal Booster in conjunction with Wilson
Electronics antennas, the outside antenna will collect the cell
tower signal and send it through the cable to the Signal Booster.
The signal is then amplified and re-transmitted through the inside
antenna into the room. Cell phones and cellular data cards in that
area then communicate with the improved signal. When a cell
phone or cellular device transmits, the signal is received by the
inside antenna, amplified by the Signal Booster and broadcasted
back to the cell tower through the outside antenna.
Inside this Package
Signal
Booster
AC/DC
Power
Supply
To purchase, call Wilson Electronics Sales Department at: 800-204-4104
Outdoor Antenna Options
Indoor Antenna Options & Accessories
1. Wide Band Directional Antenna 700 MHz -
2700 MHz (304411)
A. Wide-Band Panel Antenna 700-2700MHz (301155)
B. 50 Ohm Lightning Surge Protector N-Connector (859902)
Splitter options on page 3
1
B
A
Note: Kits may contain different accessories