Installation Guide

3
Assembly
1. Placethebasinassembly(A)upsidedownonarmlevelsurface.
2. Insert the leg frames (B) into the tubes underneath the basin. Push in until they are locked in
place.
3. Turn the sink over and move into place.
4. Fit the drainer(s) (C) into the central hole of the basin(s).
5. Connect the drainer(s) to the drainage tube(s) (D), sliding the tube or tubes’ locking ring(s)
up to the threading of the drainer(s) and screwing it/them into place.
6. Connect the drainage tube(s) to your plumbing, using an adapter or firmly caulking the
connection as needed.
Maintenance
• For best results, clear dust, limescale, food residues, etc. away from the exterior surfaces of
this water sink after use. Do not use abrasive cleaners or caustic chemicals.
• Check the parts of this water sink for any signs of looseness, wear, or damage periodically.
Tighten, repair, or replace any problematic parts before further use.
Contact Us
Thank you for choosing our products! If you have any questions or
comments, contact us at [e-mail] and we'll resolve
your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.
SKS-30DC-08 SKS-36SC-08 SKS-39GK-08
SKS-39PT-08 SKS-39SC-08
Rev. 21 Dec. 2022