User Guide

English
26 Subject to technical alterations! WILO SE 03/2016
Double pump mode: Menu order during normal use:
After switching on the module, all symbols appear on the display for 2
seconds. The current setting then sets itself. When "scrolling" in the MA
display the same menu order ... appears as for the single pump. Then the
MA menu appears and remains on the screen permanently.
LC display Setting
SL appears on this display by on MA. The
other (right-hand) pump becomes the master if SL
is confirmed by . Master and slave have now
been exchanged. Programming can now only be
performed on the right-hand (MA) pump.
Settings cannot be made at the SL. Master and slave
can only be exchanged at the master.
Setting
Peak load and duty / standby mode
The current setting is displayed:
peak-load operation,
or
main/standby operation
The other setting blinks.
Setting stored.
Display returns to basic setting .