User Guide

English
24 Subject to technical alterations! WILO SE 03/2016
Switch pump on/off.
Switch on pump, "ON" and the “module motor
symbol” appear in the display
The setting can be altered by turning
the control button.
Switch off pump, "OFF" appears in the display and
the “motor symbol” disappears.
Setting stored.
Enabling / disabling setback operation
One of the following two symbols flashes:
•automatic night setback
Pump runs in standard mode
Menu point then shows "auto "
during autom. control mode or "auto
" during automatic night-setback
• normal control mode, automatic
night-setback disabled. Menu point
does not contain any symbol
(factory default setting).
call up one of the two settings
and store.
Display jumps to the next menu.
Menu point is skipped if:
• the pump is operated with IF modules Stratos
• regulator mode was selected,
• the input 0...10 V was activated
In single-pump mode the display returns to basic setting .
In the event of an error the error menu appears before the basic
setting . In double pump mode (twin-head pump or two single pumps) the
display jumps to menu .
LC display Setting