User Guide

English
22 Subject to technical alterations!WILO SE 02/2011
Switch pump on/off.
Switch on pump, "ON" and the “module motor
symbol” appear in the display
The setting can be altered by turning
the control button.
Switch off pump, "OFF" appears in the display and
the “motor symbol” disappears.
Setting stored.
Menu point is skipped if regulator mode was
selected
Either flash
auto • automatic night setback
Pump runs in standard mode
Menu point then shows "auto
" during autom. control
mode or "auto " during
automatic night-setback
• normal control mode, automatic
night-setback disabled.
Menu point does not contain
any symbol.
call up one of the two s
ettings
and store.
Display jumps to the next menu.
Menu point is skipped if:
• the pump is operated at PLR/LON/CAN
•regulator mode was selected,
• the input 0...10 V was activated
LC display Setting