User Guide

English
Installation and operating instructions Wilo-Stratos GIGA 5
2.6 Safety precautions for inspection
and installation
The operator must ensure that all inspection and installation work is
carried out by authorized and qualified specialists who have carefully
reviewed these instructions.
Work on the pump/unit must be carried out only with the pump dis-
connected (locked out) from the electrical supply and at complete
standstill. It is mandatory that the procedure described in the instal-
lation and operating instructions for shutting down the product/unit
be complied with.
Immediately on conclusion of the work, all safety and protective
devices must be put back in position and/or recommissioned.
2.7 Unauthorized alterations and
manufacture of spare parts
Unauthorised modification and manufacture of spare parts will impair
the safety of the product/personnel and will make void the manufac-
turer's declarations regarding safety.
Alterations to the product may only be carried out with the manufac-
turer's consent. The use of original spare parts and accessories autho-
rized by the manufacturer will ensure safety. The use of any other
parts may invalidate claims involving the liability of the manufacturer
for any consequences.
2.8 Improper use The operational safety of the supplied product can only be guaran-
teed if it is used in accordance with paragraph 4 of the operating
instructions. The limits given in the catalogue or data sheet must
under no circumstances be exceeded.
3 Transport and interim storage
3.1 Shipping The pump is delivered from the factory packaged in a cardboard box
or secured to a pallet and protected against dust and moisture.
Transport inspection When receiving the material, check that there has been no damage
during the transport. If shipping damage has occurred, take all neces-
sary steps with the carrier within the allowed time.
Storage Before installation, the pump must be kept dry, frost-free and pro-
tected from mechanical damage.
CAUTION! Risk of damage due to incorrect packaging!
If the pump is transported again at a later time, it must be packaged
so that it cannot be damaged during transport.
• Use the original packaging for this, or choose equivalent packag-
ing. Use the provided transport eyes for lifting.
• Check the transport eyes before use for damage and secure fixa-
tion.