Assembly Instructions

PAGE 1
SCREWS —»ﬂ CROSSBAR—"" METAL SHADE \ CANOPY ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS TOOLS: you WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT: LADDER, SCREWDRIVER, ADJUSTABLE WRENCH, WIRE CUTTERS UNPACK THE FIXTURE YOU SHOULD HAVE RECEIVED THE FOLLOWING: CANOPY, STRAIN RELIEF WITH SET SCREW AND METAL SHADE ASSEMBLY MOUNTING HARDWARE PACKAGE: x 1" SCREWS, x 1 1/2" SCREWS, (2)BALL FINIAL, CROSS BAR, GREEN GROUND SCREW, (3)WIRE CONNECTORS. TO PROTECT THE FINISH, PLACE ALL PARTS ON A SOFT SURFACE.
PAGE 2
SUPPLY GROUND WIRE —— OUTLET BOX BLACK SUPPLY WIRE ] WHITE SUPPLY WIRE CEILING ; WIRE CONNECTORS, BLACK OR SMOOTH | (3) REQUIRED FIXTURE WIRE | T WHITE OR RIBBED 8-32 * 1" SCREWS, —— FIXTURE WIRE SUPPLIED WITH BOX \ CROSSBAR | | FIXTURE GROUND WIRE / 5-32 % 1 1/2" SCREWS = CANOPY —Mmm = STRAIN RELIEF GREEN GROUND SCREW SET SCREW BALL FINIAL INSTALLATION INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK, MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL.