Installation & Assembly

1. Remove mounting bracket from fixture and
install to electrical box.
2. Attach appropriate amount of chain to loop on
center stem to achieve desired mounting height.
Thread wire through every 3rd loop of chain.
3. Remove screw ring from collar loop and slide
down chain. Place canopy onto chain. Install
nipple and cross bar into top of chain loop.
4. Wire fixture to wires in outlet box. Copper wire is
for Ground.
5. Pull canopy through screw ring up chain to
ceiling and tighten securely.
Cleaning & Care:
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner
TOP LOOP
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Page 2 of (2)
6. Install max 60W E12 bulbs.