Assembly & Installation Instructions

ManualsBrandsWilliston Forge ManualsCeiling LightsHaag 4 - Light Kitchen Island Linear Pendant

Turn off the power at fuse or circuit box

For Wall Light Hardware Package (included):

Headless

Screw (K)

Mounting

Screw (I)

Green Ground

Screw (J)

Lock Nut (M)Wire Connector (L) Ball Nut (N)Mounting Plate (H)

6. Reel out the cord carefully from the main fixture to Adjust the

length of cord you need.

7. Install 3 x 60W max medium base vintage bulbs (included) to

the sockets.

8. Unscrew three set screws from the glass holder. Hold the socket

into the glass shade, thread the three set screws through each

holes of glass shades, and then secure them into the glass holder.

9. Repeat with the other glass shade.

10.Angled mounting recommended for a vaulted or angled ceiling.

(See Fig. 1)

For Wall Light Installation Steps

Turn on the power at fuse or circuit box.

House Ground Wire

Green Ground Screw (J)

Wire Connector (L)

Mounting Screw (I)

Headless Screw (K)

Outlet Box

Fixture Wire

Lock Nut (M)

Mounting Plate (H)

Fixture Ground Wire

Ball Nut (N)

Socket

Glass Shade

Glass Holder

Main Fixture

Set Screw

Hex Nut

Washer

Cord

Fig. 1

Outlet Box

Support Brace

Canopy

Coupling Kit

1. Take out the canopy cover assembly, remove the coupling

kit from canopy cover assembly by wrench (See Fig. 2).

Do not discard the washer and hex nut.

2. Slip the canopy through the wires and threaded pipe of

the fixture, secure it with the metal pad, washer and hex

nut by wrench.

Canopy Cover Assembly

Wrench (O)

Vintage Bulb

Max.60W

(not included)