ASSEMBLY INSTRUCTIONS Description: Lounge Important safety instructions: ® Please carefully read all instructions before assembling the lounge. ® For your safety and sass, assembly by two or more adults is recommended. ® Keep instructions for future use. Pr-assembly: ® Do not discard any contents until after assembly is completes to avoid accidentally discarding small parts or hardware. ® Remove all parts and hardware from box along with any plastic protective packaging.
Step 2. Loosely tighten the bolts (a) to the stretcher and side metal frame (A & B) with Allen wrench Step 3. Open the bottom covering of seat cushion (E), then attach the seat cushion (E) to the back cushion (D) using bolts (e), lock washers (f) and flat washers (g).
Step 4. Attach the assembled lounge (D, E)to the assembled frame (A, B, C) using bolts (d). Loosely tighten the bolts (d) with Allen wrench Step 4 Step 5. 1) Attach the metal arm to the side of back cushion using bolts (c), lock washers (f) and flat washers (h). Loosely tighten with Allen wrench (i) as shown below. 2) Attach the wood amn rests (F) to the metal arm (A, B) using bolts (b). Loosely titan all bolts with Allen wrench (i}. 3) Securely titan all bolts, but do not aver tighten the bolts. 4.
