Assembly & Installation Instructions

4. Attach the nipple to the mounting strap, then secure it with hex nut and washer.

5. Attach the mounting strap to outlet box by using two mounting screws.

6. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections using

the wire nuts:

---The black wire from fixture to the black wire from

power source.

---The white wire from fixture to the white wire from

power source.

---Attach the fixture grounding wire to the mounting

strap with the green grounding screw. Then connect

it to the house grounding wire with the wire nut.

Carefully put the wires back into the outlet box.

7. Attach the canopy to the mounting strap, and secure

it with collar.

8. Install a bulb (not included). See relamping label at

socket area or packaging for maximum allowed wattage.

9. Turn on the power at the main fuse or circuit breaker box.

10. Angled mounting recommended for a vaulted

or angled ceiling. (See Fig. 1)

11. The fixture can be mounted as a wall lamp. The

wall lamp should be mounted in the same way

as the Mini-pendant. (See Fig. 2)

A: 6"

B: 18" ~ 72"

Fig. 1

Outlet Box

Support Brace

Canopy

Coupling Kit

Wall

Fig. 2