Assembly & Installation Instructions

4. Attach the nipple to the mounting strap, then secure it with hex nut and washer.
5. Attach the mounting strap to outlet box by using two mounting screws.
6. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections using
the wire nuts:
---The black wire from fixture to the black wire from power source.
---The white wire from fixture to the white wire from power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
7. Attach the canopy to the mounting strap, and secure
it with collar.
8. Install bulbs (not included). See relamping label at
socket area or packaging for maximum allowed wattage.
9. Turn on the power at the main fuse or circuit breaker box.
10. Angled mounting recommended for a vaulted
or angled ceiling. (See Fig. 1)
A: 13"
B: 30-1/2" ~ 84-1/2"
A
B
Fig. 1
Outlet Box
Support Brace
Canopy
Coupling Kit