Assembly Instruction
Back Plate
Ball Nut(-b)
Glass Shade
Fixture
Frame
House Grounding Wire
Green Grounding Screw
Fixture Grounding Wire
Wire Nut
Mounting Screw
Mounting Plate
Outlet Box
Fixture Wire
Lock Nut
Headless Screw
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Contents of Spare Parts:
Bulb Type G Max.60 W
(Not included)
Assembly Kit
(1 SET)
(4462MM)
Glass Shade
(3 PCS)
(9315S)
Rubber Pad
Ball Nut(-b)
Rubber Pad
1. Thread two headless screws to
the mounting plate, and secure
them with four lock nuts (two on
each side of the mounting plate).
Adjust the length of the headless
screws if necessary.
Note: Make sure that the headless
screws are lined up horizontally,
to ensure that the fixture will be
level.
2. Attach the mounting plate to the
outlet box by using two mounting screws.
3. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections
using the wire nuts:
---Connect the black wire from the fixture to the black wire from the power source.
---Connect the white wire from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then
connect it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
4. Attach the back plate to the mounting plate by inserting the headless screws, then secure it with
two rubber pads and ball nuts(-b).
CAUTION: With silicone caulking compound, caulk completely around where the back plate meets
with the wall surface to prevent water from seeping into the outlet box.
5. Attach the glass shades and frames onto the fixture, secure it with the rubber pads and ball nuts(-b).
6. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed
wattage.
7. Turn on the power at the main fuse or circuit breaker box.
Socket
Ball Nut(-b)
(6 PCS)
(4460BB)