Installation & Assembly

ge 1 of 2

Hardware:

Component:

Bolt M6x14mm x 4

Allen Wrench M6 x 1

Chair Back x1

Chair Base x1

Thank you for purchasing the CHAIR!

Before you start, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step

instructions.

2.Owing to the size and weight of the chair , we recommend that it is assembled by two adults, on a

carpeted or padded area, in the room that it is intended for. Approximate assembly time: 15 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or instructions until you have checked all the components and

hardware and the furniture is fully assembled.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that have been provided.

6.Please keep all pieces out of reach of small children.

Nut M6 x 4

Wrench M6 x 1

DINING SIDE CHAIR SET OF 2

PAGE 1
DINING SIDE CHAIR SET OF 2 Thank you for purchasing the CHAIR! Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2.Owing to the size and weight of the chair , we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 15 minutes. 3.
PAGE 2
STEP 1: Put the Chair Base (2) on a carpeted or padded area. Attach the Chair Base (2) to the Chair Back (1) by using 4 piece of Bolt (A) and 4 piece of Nut (B) as shown. Use Wrench (C) and Allen Wrench (D) to tighten the Bolts (A) and Nut (B) until secure. 1 1 A A B A A B B B A D 2 2 B C Ax4 Bx4 Cx1 Dx1 Hardware & Tool required STEP 2: Carefully put the assembled chair to the place you desired. Assembly is completed.