Caution : You must read this before you proceed Trolley Label Picture Description QTY A Wooden Tray 2 B Left Leg Frame 1 C Right Leg Frame 1 D X' Iron Stretcher 1 Page1 of 6
Label Picture Description QTY ① Nut Cap 5 ② Wrench 1 ③ Bolt (M6*15) 9 ④ Allen Key 1 Before Beginning Assembly: Page2 of 6
Overview Left Leg Frame(B) Right Leg Frme(C) Wooden Tray(A) 'X' Iron Stretcher(D) This Trolley has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Trolley parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all parts onto a clean, non-marring surface.
Step 2 Attach Wooden Tray(A) to Left Leg Frame(B) using Bolts(③) with Allen Key(④). Do not fully tighten the Bolts. Step 3 Attach bottom Wooden Tray(A) between Right Leg Frame(C) and Left Leg Frame(B) using Bolts(③) with Allen Key(④). Do not fully tighten the Bolts.
Step 4 Place the Trolley face down as shown. Align the 'X' Iron Stretcher(D) with the four corners of the Trolley. Attach 'X' Iron Stretcher to the Trolley using Nut Caps(①) with Wrench(②). Do not fully tighten the Nut Caps. Step 5 Stand theTrolley up. Check for stability and then tighten the Bolts and Nut Caps. DO NOT fully tighten a Bolt or Nut Cap in one go and then move on to the next.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
