Installation Instructions

INSTALLATION IS NOW COMPLETED.
4, Install bulbs.(Please do not exceed the maximum capacity which is
recommended on the sockets).
ASSEMBLY AND INSTALLATION
1, Attach the Screw with the Hex Nut to the Cross bar, then attach the Cross
Bar to the Outlet Box by using 2pcs Mounting Screws-2
2 , Make wire connections:
--Smooth wire (w/marking) from the light to black wire_from power source.
--Ribbed wire (w/o marking) from the light to white wire from power source
--Attach the ground wire to the cross bar with a green ground srrew.
Carefully tuck wire back into the OUTLET BOX
3, Place the Canopy against the Outlet box, secure with the Ball nut.
BALL NUT
All electrical connections must be in accordance with local and National
Electrical Code(N.E.C) standards.If you are unfamiliar with proper electrical
wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that
no parts are missing by referencing the illustrations on the installation
instructions.
_.,..,......nUTLET BOX
---~uHITE WIRE
BLACK WIRE'-----11
WIRE CONNECTQD--__...::;::._
GENERAL
CAUTION
Turn off the main power at the circuit breaker before installing the fixture.in order
to prevent possible shock.
SEMI-FLUSH FIXTURE
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions.as you may need them a later
date.