Assembly Instructions All rights reserved. P.
Insert wooden dowel (J) into part ( 6,7), secure cam bolt (L) to part (4) with screwdriver.
Insert part (6,7) to part (4), then secure cam lock (K) to part (6,7) with screwdriver.
Insert part (9) into part (4,6,7) as per diagram.
Attach part (5) to part (6,7) using bolt (H) with hex key (C).
Attach part (11,12) to part (5) using bolt (A,B) with hex key (C).
Attach part (8,11,12) to part (1, 2) using bolt (A,B) with hex key (C).
Attach part (11,12) to part (3) using bolt (A,B) with hex key (C).
Attach part (16) to part (10,15) as per diagram.
Attach part (10,16) to part (6,8,11,12) using bolt (B,T) with hex key (C).
Attach part (15,16) to part (7,8,11,12) using bolt (B,T) with hex key (C).
Place sticker (M) over holes as per diagram.
Attach bracket (E) to part (8) using bolt (A) with hex key (C).
Attach plate (R) to part (4) using screw (P) with screwdriver.
Attach plastic wedge (Q) to part (9) using screw (N) with screwdriver.
Attach hinge (U) to part (13,14) using screw (P) with screwdriver.
Attach part (13) to part (6) using screw (P) with screwdriver.
Attach part (14) to part (7) using screw (P) with screwdriver.
1. Measure height for bracket in desired location. 2. Drill hole using 6mm size bit. 3. Insert wall anchor (G) into wall at desired location. *Wall anchor included for drywall mounting. Use correct wall anchor and hardware for your wall material.
Secure furniture to wall anchor (G) in wall using washer (D) and screw (F) with screwdriver.
