Assembly Instructions Please visit our website for the most current instructions, assembly tips, report damage, or request parts. All rights reserved. P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The two main types of hardware used to assemble this product are : screws and bolts. V. A Phillips head screwdriver is required for the assembly of this product . VI. Power tools should not be used to assemble this product .
Parts List 5 3 1 5 3 6 4 2 6 4 7 7 All rights reserved. P.
Step 1 B B 6 F B 2 Attach part (6) to part (2) using bolt (B) with hex key (F). Step 2 B B F 6 B 2 Attach part (6) to part (2) using bolt (B) with hex key (F). All rights reserved. P.
Step 3 D 4 D Attach adjuster (D) to part (4). Step 4 B F B 4 3 Attach part (4) to part (3) using bolt (B) with hex key (F). All rights reserved. P.
Step 5 3 C C 4 Attach part (4) to part (3) using screw (C) with screwdriver. Step 6 7 6 5 7 F A x6pcs 4 6 5 Attach part (4) to part (5,6,7) using bolt (A) with hex key (F). All rights reserved. P.
Step 7 5 6 7 5 F A x6pcs 6 7 4 Attach part (4) to part (5,6,7) using bolt (A) with hex key (F). Step 8 E E E E E E E E Remove cover tape on glass pads (E), then stick it as diagram. All rights reserved. P.
Step 9 1 Place Glass (1) into frame carefully as per diagram. Step 10 Final Assembly All rights reserved. P.