Installation & Assembly

Step 4
Drill two mounting positions on wall with Power Drill(⑬)
Put the Headboard against the wall where desired and mark the location for
the Metal Brackets(⑦) to be the same height as the top of the Headboard.
Insert the Plastic Anchor(⑨) into the wall to the location marked with
Hammer(⑫), and fix Metal bracket(⑦) to Plastic Anchor(⑨)with Screw(⑧)
by using screw driver.
Move the Headboard back against wall.
Pull the Restraint Straps(⑩) through the Metal Brackets(⑦) on the wall and
Headboard(A) one by one, and pull the Restraint Straps(⑩) tight.
Your Headboard is ready for use.
Caution: This headboard can only be used on a flat, level surface.
Page 8 OF 9