Owner Manual

Page 7
4.1
Step 4
Step 5
Attach Brackets( ) to Wall Plugs( ) using Wall Plug Screws( ) with
Screwdriver( ).
6
4.2
9
5
7
9
8
4
8
4
7
8
9
9
4.1)
You can mark these points in two ways as below:
1) Move the Wine Rack back to the wall. Mark tw
o points same height as Wine Rack
on t
he wall.
Note: The Brackets need to be secured to solid, load bearing surface. Please
use a Stud Finder(not supplied) if needed to locate the Wall Frame.
2) Measure the height of the Brackets( ) with ruler/measuring tape and mark on
wall to keep them accurate and same height.
4.2) Insert Wall Plugs( ) into drilled holes on wall with Hammer( ).
7
9
5
Drill two holes on wall at same height as Brackets( ) on Wine Rack with Power Drill(
).
6
7