Owner Manual

ManualsBrandsWilliston Forge ManualsBar FurnitureSamir Mango Wood Bar Cabinet

WARNING!!

Furniture Tipping Risk.

Serious risk of severe or fatal crush injuries can occur from

furniture tipping over if not secured.

Children like to climb on furniture and Unsecured furniture

can pose a serious danger.

Please follow all instructions and install the tip-over

restraints provided.

In addition to installing the restraints, to help prevent tip-

over:

1. Unless specifically designed to accommodate, do not set

TV’s or other heavy objects on top of this product.

2. Never allow children to climb or hang on top glass.

3. Do not step on the Wine Rack base.

Page 1

Summary of content (8 pages)

PAGE 1
WARNING!! Furniture Tipping Risk. Serious risk of severe or fatal crush injuries can occur from furniture tipping over if not secured. Children like to climb on furniture and Unsecured furniture can pose a serious danger. Please follow all instructions and install the tip-over restraints provided. In addition to installing the restraints, to help prevent tipover: 1. Unless specifically designed to accommodate, do not set TV’s or other heavy objects on top of this product. 2.
PAGE 2
Assembly Instructions Caution: You must read this before you proceed WINE RACK Parts List Description Qty A Wine Rack 1 B Metal Leg 4 Label Picture Page 2
PAGE 3
Hardware Label Picture Description Qty 1 Washer 9 2 Nut 9 3 Spanner 1 4 Screwdriver (not provided) 1 5 Hammer (not provided) 1 6 Power Drill (not provided) 1 Bracket 7 2 8 Wall Plug Screw 4 9 Wall Plug 4 Cabinet Restraint Strap 10 2 Assembly Preparation Before Beginning Assembly: Read instructions,cover to coverHave 2 adults on hand for assemblyDo not assemble on flooring or carpet Assemble on a clean non-marring surface (packing foam) Save all packaging until finished -
PAGE 4
Assembly steps Overview Wine Rack(A) Metal Leg(B) This Wine Rack has multiple parts and may require up to some 30 minutes to assemble.The above picture is to help you in putting various parts into perspective.Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 1.1 With help of your adult partner, carefully stand the Wine Rack: 1.1) Put out the drawers, door and deassemble the knobs with the help of screw driver.
PAGE 5
1.2 1.2) Install the Knobs on the drawers and on the door with the help of screwdriver as picture above. Step 2 2 3 1 A With assistance from your adult partner,place the Wine Rack(A) face down as picture, on clean, non-marring surface.As shown in “Step 1” picture attach Metal Leg(B) to Wine Rack(A) using Washers( 1 ),Nuts( 2 ) with Spanner( 3 ).
PAGE 6
Step 3 Repeat “Step 2” to assemble all the other three Metal Legs(B) to Wine Rack(A). Upon assembly of all the legs, flip the Wine Rack as shown in “Step 3”. WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet Restraint Device. See product instructions for more ways to help prevent furniture tip-over.
PAGE 7
Step 4 4.2 4.1 9 6 5 4.1) Drill two holes on wall at same height as Brackets( 7 ) on Wine Rack with Power Drill( 6 ). You can mark these points in two ways as below: 1) Move the Wine Rack back to the wall. Mark two points same height as Wine Rack on the wall. Note: The Brackets need to be secured to solid, load bearing surface. Please use a Stud Finder(not supplied) if needed to locate the Wall Frame.
PAGE 8
Step 6 10 7 7 Move Wine Rack to the wall. Pull the Restraint Straps( 10) through the Brackets( 7 ) on the wall and Wine Rack one by one, and pull the Restraint Straps(10 ) tight. This Wine Rack is now ready to use. Caution: This Wine Rack can only be used on flat, level surface. Care & Maintenance Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents.