Installation & Assembly

STEP 2: Gently put the metal frame (F) on the floor and make sure the backside is upwards.

Attach the metal leg to the metal frame (F) and screw in 8 screws ( I ). Finally tighten all

screws with Allen wrench tool (k).

STEP 3: Gently put the panel (E) on the floor and make sure the backside is upwards. Attach the

metal leg to the panel (E) and screw in 4 screws (J). And then tighten all screws (J) with Philips

screw driver. Then set the stool upright and ensure all screws have been tightened before use.

Assemble the other stool in the same way.

6/6