Table with 2 stools Thanks for your purchase and enjoy! 1/6
30 0.59" I 0.
TABLE STEP-BY-STEP ASSEMBLY: STEP 1: Attach the metal frame (C) to the leg (D) on one side and screw in 1 screw ( I ). Then attach the other legs (D) to the metal frame (C) by repeating the above steps. Finally tighten all screws with Allen wrench tool (K).
STEP 2: Gently put the metal frame (B) on the floor and make sure the backside is upwards. Attach the metal leg to the metal frame (B) and screw in 8 screws ( I ). Finally tighten all screws with Allen wrench tool (k). I STEP 3: Gently put the panel (A) on the floor and make sure the backside is upwards. Attach the metal leg to the panel (A) and screw in 4 screws (J). And then tighten all screws (J) with Philips screw driver. Then set the table upright and ensure all screws have been tightened before use.
2 STOOLS STEP-BY-STEP ASSEMBLY: STEP 1: Attach the metal frame (G) to the leg (H) on one side and screw in 1 screw ( I ). Then attach the other legs (H) to the metal frame (G) by repeating the above steps. Finally tighten all screws with Allen wrench tool (K).
STEP 2: Gently put the metal frame (F) on the floor and make sure the backside is upwards. Attach the metal leg to the metal frame (F) and screw in 8 screws ( I ). Finally tighten all screws with Allen wrench tool (k). I STEP 3: Gently put the panel (E) on the floor and make sure the backside is upwards. Attach the metal leg to the panel (E) and screw in 4 screws (J). And then tighten all screws (J) with Philips screw driver. Then set the stool upright and ensure all screws have been tightened before use.
