DINING TABLE ASSEMBLY INSTRUCTIONS Do not throw away the packaging material until the assembly is complete, To protect finish, assemble this item on a soft surface such as a cardboard or a carpet. Until all parts are in place, do not fully tighten all the bolts. CARE INSTRUCTIONS Wipe only with a soft & dry cloth. To protect finish, avoid the use of chemicals and household cleaners. Any liquid spilled on the furniture should be cleaned up immediately with a damp cloth.
PRODUCT PARTS HARDWARE PROVIDED Flat Washer @20mmx Dummy, 2 12X T1 T Wooden Tops E Screw MBExz0mm, 12X Metal Legs G L-Key D4mmx110mm, 1X
STEP Turn the Wooden Tops (T1,T2) upside down and put them together as shown In the image below. Then align the Metal Legs (A,B) with the Top.
Note the highlighted areas in red below to know where to tighten Screws (E) and Washers (F). STEP Using the L-Key (G), tighten Screws (E) and Washers highlighted areas to secure the Metal Legs to the Wooden Tops (T1,T2).
