Assembly Instructions

***Caution: Please read all instructions carefully before starting the assembly process. These parts
are cumbersome and heavy. Therefore, two people are recommended in order to prevent personal
injury and insure the parts are not damaged during the assembly.
Step 3: The tipping restraint must be attached at back of Dresser, above and on the right or left.
Top
Made in Vietnam
Cleaning instructions: Clean using soft cloth
Page: 2/2
ASSEMBLY INSTRUCTIONS
Step 2: Attach Mirror Support (3) to back of Mirror (2) by using Flat Washer (D), Spring Washer
(C), Allen Bolt (B) and tighten with Allen Key (A). Align holes in Mirror Support with
pre-drilled Dresser and Mirror must be center.
Step 2:
Step 3:
ITEM: DRESSER
MIRROR